Thanks to the unique Seat-Lock fastening system, the Seat-Pack QR can be installed quickly and stably and dismantled quickly and without leaving any residue. The adapter clamp even allows the use of lowerable seat posts, meaning the innovative Seat-Pack QR can be used in a variety of ways.
Whether single trail, Alpine pass or gravel route, with the waterproof Seat-Pack QR you are ready for any cycling adventure. With the innovative and patented Seat-Lock fastening system, the bag made of abrasion-resistant nylon fabric is super stable, quickly assembled and dismantled just as quickly and without leaving any residue. Thanks to the adapter clamp, the Seat-Pack QR is even suitable for lowerable seat posts and only requires 4.3 cm of space on the dropper post. The internal stiffener and five compression straps ensure that the contents are securely and tightly packed. A valve with a handle loop helps compress the packing volume and the elastic cord on the outside allows additional equipment to be secured. To prevent damage in the event of tire contact, a protective plate is attached to the underside of the Seat-Pack QR, which also serves as a replacement mudguard.
OTHER PRACTICAL DETAILS:
+ Our reflector ensures good visibility and safety
+ Daisy chain for attaching a rear light
COMPATIBILITY NOTE
YOU CAN EASILY CHECK WHETHER YOUR SADDLE IS SUITABLE:
1. The saddle frame must have a slope of at least 34° at the bend point
2. Measured from the bend point, you need at least 13mm distance along the saddle frame from the saddle clamp and the saddle underbody
3. The lower side edge of your saddle must be at least 14mm higher than the lower edge of the saddle frame (measured at the bend point)
UNFORTUNATELY THE FOLLOWING COMPONENTS ARE NOT SUITABLE:
+ Carbon seat posts and carbon saddles
+ Suspension seat posts
+ Saddles with unusual saddle frames e.g. SQLab Active, Brooks B67 (=> note 2.)
+ Electronic Vario seat posts e.g. Rock Shox Reverb AXS or Magura Vyron
If you still have problems with the initial assembly, make sure that the Seat Lock System on the bag is moved as far forward as possible (towards the seat post) and that the four locking screws of the Seat Lock System are loosened. This is the easiest way to assemble the bag and find a suitable position.
(For further information, please use the operating instructions!)
| COLOR |
black matt |
| MATERIAL |
PS21R, PS33 |
| BAG TYPE |
Single bag |
| ADAPTER |
- |
| DIRECTIONS |
Download
|
| DATA SHEET |
Download
|
| 360° VIEW |
360° view
|
| WEIGHT |
625g | 22 oz |
| HEIGHT |
28cm | 11 inches |
| WIDTH |
48cm | 18.9 inches |
| DEPTH |
22cm | 8.7 inches |
| VOLUME |
13L | 793 cu.inch |
| LOAD |
4kg | 8.8 lbs |
